LEGO Dark Falcon Wall Mount Assembly Instructions
Step 1: Model Prep
Firstly, ensure you've received all the components in the image below, as well as 2 screws and wall plugs.
To prep your dark falcon model. You will need to remove the bottom gunner turret. This is because the main connection piece fits around this turret.
Step 2 : Assembly
Next, push the components together slowly and slot the pins through the hole until they click into place. Ensure that the kit is fit securely. Now fit the wall mount to the wall, as once the next piece is placed, it may be harder to fit the screw driver in.
Step 3
Place the large connector piece onto the octagon, and then slide your dark falcon model onto the top of this piece. It will fit around the removed gunner turret. The holes on the side of this piece are designed to fit a Lego technical pin. These are additional features that can be used to add extra security to your Dark Falcon model.
Now you can enjoy your dark falcon model as it soars around your room! If you require any additional information, please feel free to contact us!