LEGO Ghost & Phantom II 75357 Wall Mount Instructions – Step-by-Step Guide

 

Introduction

Showcase your LEGO Ghost & Phantom II (75357) models with our custom wall mount display stand! Follow this step-by-step guide to securely assemble and mount your set for an impressive angled presentation.

What You Need for the LEGO Ghost & Phantom II Wall Mount

Before getting started, ensure you have received all necessary components:

- 6 component pieces

- 2 screws

- 2 wall plugs

These parts are essential for a stable and secure wall display.

Step-by-Step Instructions

Step 1: Arrange the Components

Lay out the 6 component pieces as shown in the image to ensure all parts are accounted for.

Step 2: Assemble the Hexagonal Pieces

Slowly push together the two hexagonal pieces, ensuring the pins align correctly with their corresponding holes.

Step 3: Attach the Remaining Components

Carefully push the four additional components together, making sure that all pins and holes are correctly aligned for a secure fit.

 

Step 4: Connect the Hexagonal and Octagonal Pieces

Push the combined hexagonal pieces onto the octagonal connector, ensuring that the two flared sections are positioned at the rear in the direction you want your model to face.

 

Step 5: Secure the Mount on the Wall

Once the model is fully assembled, fix it to the wall using the provided screws and wall plugs. The hexagonal piece will fit securely into the base of the LEGO Ghost model, with the flared section positioned toward the back for optimal display.

Need Assistance?

If you require any additional guidance, feel free to contact us below. Enjoy displaying your LEGO Ghost & Phantom II (75357) with style! 🚀