UCS Tie Interceptor Wall Display Instructions

LEGO UCS Star Wars TIE Interceptor 75382 Wall Display Assembly Instructions

Enhance your LEGO® display with this LEGO wall mount solution, perfect for showcasing your collection. Whether you're using a LEGO display stand, an acrylic display stand, or a LEGO wall display, this setup provides a secure and stylish way to feature your favorite builds. Designed for collectors, this LEGO set display ensures your models are both protected and prominently showcased. Follow the steps below to assemble and install your LEGO collector display with ease.  

Before you begin assembling your model, ensure that you have all 6 component pieces, along with the 2 wall plugs and screws included in the set. 

Lego Wall Display Assembly

Step 1

Take the long square connector and gently push it into the corresponding hole of the angled plate. Make sure the pins are fully inserted through the plate for a secure fit. 

Step 2

Carefully push all remaining pieces together, ensuring that each pin aligns correctly with its designated hole. Apply steady pressure to secure the connections. Until your mount looks the same as the picture.

Step 3

Once the model is securely assembled, fix it to the wall using the screws and wall plugs provided. If you're unsure on how to fit a wall plug, then a link has been provided explaining the necessary steps! The square piece extruding out will fit into the base of the UCS TIE Interceptor model. If you require any additional guidance, feel free to contact us below.